Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player



ozone Generator

ozone Generator

ozone Generator


Water purifier

Hollow Block


Hollow Block


Hollow Block


Applications-Packaged Drinking Water

Water purification is a process of removing undesirable chemicals, materials, and biological contaminants from raw water. The goal is to produce water fit for a specific purpose.

Most water is purified for human consumption (Drinking water) but water purification may also be designed for a variety of other purposes, including meeting the requirements of medical, pharmacology, chemical and industrial applications.

In general the methods used include physical processes such as filteration and sedimentation, biological processes such as slow sand filters or activated sludge,, chemical processes such as chlorination and the use of electromagnetic radiation such as Ultra light.

Ozone For Bottling Application:

1. Over the recent past years there has been an increasing demand for water in bottles, cans, etc.,

2. One particular problem that plagues the bottled water industry is the microbial quality of the bottled products.

3. In addition to the careful selection of the product's ingredients and storage containers (bottles, cans, etc..,) filling companies take further measures to ensure that the product quality remains unchanged after extended periods under typical storage conditions found in distribution centers and retail outlets.

4. The main reason for low product quality with a compromised shelf life is microbial contamination - extensive precautions must be taken to prevent this.

5. The manufactures can give 100% quality water, where as there are possibilities to grow algae and fungal growth due to temperature and other natural changes, you can avoid those problems with proper ozonised and sealed.

6. There are two possibilities to use ozone when bottling drinking water: Ozonation of the washing water used to clean the bottles prior to filling. Ozonation of the actual product water.

7. Reusable transparent cans have to be intensively cleaned so that all debris and any possible residues from the previous filling are completely removed. In the region of 0.3mg/1 to 0.5mg/1, is sufficient to sanities the product and the product packaging. After filling the ozonated product, the crated or palleted bottles are placed on stock for a 24 hrs to 48hrs in order to allow the ozone to decompose.

8. The PET type bottles that are freshly blown immediately prior to filling. Although these are new, operators must subject the bottles to washing in order to remove any possible mechanical debris.

Introduction of ozone in product water

(i) Diffuser method.

(ii) Online venture method.

(iii) Venture with recycling method.

9. In addition to this mechanical cleaning, filling companies require that this cleaning also disinfects the bottles in order to avoid microbial contamination after the filling and capping of the product. To achieve this effect it is standard practice to add a relative amount of chlorine, or one of its derivatives, to the wash water.

10. It is thinkable to use ozone for this sanitation process, however, attention must be given to the fact that the ozone will be driven out of solution by the "splashy" nature of the cleaning process. Bearing this in mind, special measures ozone destructor must be taken to prevent unacceptable levels of ozone building up in the ambient surrounding the filling machine.

11.Treatment with ozone only produces "oxygenated" by-products and oxygen. This property makes it ideal for applications in the food-stuffs industry because it results in a product that is better in quality with regard to taste and odour and is actually healthier for the consumer.


Ozone Generator for Packaged Drinking Water, Ozonator for Packaged Drinking Water ,Alpha Power, Coimbatore, Tamil Nadu. We are supplying our products to Chennai, Bangalore, Karnataka, Hyderabad, Andhra, Cochin, Kerala.